Garage door repair can often be done by the homeowner even. There are at
least 5 simple things to check before you call a professional. Some repairs is
extremely easy. For example, to a rigid or a squeaky door just require a good
cleaning and lubrication. Other repairs, such as repairing a shear spring, is
extremely dangerous and require the assistance of a professional.
Before you proceed to repair, be sure to Unplug your garage door throat
opening, so you don't get an electric shock, while you repair garage door. You
will most likely be standing on a ladder, which is a very bad place to get an
electric shock, since you can also fall off the ladder. Also, remember to wear
safety glasses when you work with power tools.
Here is a list of things to check before asking for a professional to the
garage door repair:
1. Check Metal tracks actions for damages
This easy garage door repair tips can often solve the problem very fast.
Metal tracks can often have dents or shock. If you find such damage, strike the
damaged part of the track with a wood block and a hammer to Stretch the
track.
2. Control the alignment of the tracks
If the tracks are not adjusted well, they can cause the door not to work. It
is not always necessary to Unscrew the tracks; You can only try to loosen bolts
or screws and tap the tracks a bit into position. Use a level to control the
alignment of the tracks. Adjusted tracks will let you do with your garage door
repair in no time.
3. clean and dry the tracks
Although it may sound obvious, but hardened dirt and old lubricant can be the
cause of the garage door sticking. In this case, your garage door repair consist
of simply cleaning the tracks and then drying them, You can use regular
all-purpose cleaners clean the tracks.
4. Lubrication tracks and rollers
Just lubricating both tracks and rollers, can resolve the issue and connect
your garage door repair in no time. Lubrication, you can use a lubricant spray
or a silicon spray. It is probably better to lubricate the tracks after cleaning
them Actually benefit anyone. moving part from lubrication.
5. Tightening loose bolts and screws
Bolts and screws tendency to become loose over time. Try to check all the
screws and bolts are involved in the mechanism of opening/closing of the door.
Sometimes can simply tightening them solve the whole problem. If you cannot
tighten screws, because gaps, even have been loose, you can use a "wood filler"
or pieces of normal wood to fill the gaps.
What not to do?
If you've tried each of the above solutions, and none of them worked, the
problem may be door spring. However, it is advised not to carry out your garage
door repair, if the problem seems to be the spring, especially if it is a shear
spring. Unfortunately, there have been many cases where people have been injured
or even killed by garage door springs. One of the most common injury is a hit in
the head, resulting in severe trauma to the brain.
If you have doubts about your garage repair, by no means should you try to call Garage door repair san diego. However, a professional will save you from any
injury.
Uploading ....